|
Opties en accessoires |
FOTO |
500 |
|
Basis prijs Incl. B.T.W. |
|
19 488 € |
| 1 |
- Steering console with removable windshield, - Steering gear up to 115 PH with engine return blockage with tie, - Steering wheel - INOX or sporty, - Holders for cell phone and drink, - Swivel seat Premium with height adjustment and shock absorber, - Possibility of build-in sonar screen on steering console. |
|
 |
| 2 |
Passenger seat Premium with mount socket - removable, swivel |
|
 |
| 3 |
Casting seat on the upper deck, pneumatically adjustable in the 61-76 cm range, removable. |
|
 |
| 4 |
Locker: - No. 1 (rear) - technical locker (battery, pumps, installations); - No. 2 (left rear) - Livewell locker - No. 3 (left) - the possibility of equipping the containers under the cover of the locker; - No. 4 (left) - length 220 cm for fishing rods, the possibility of equipping the containers under the cover of the locker; - No. 5 (middle) - the possibility of equipping the containers under the cover of the locker; - No. 6 (front) - the possibility of equipping the containers under the cover of the locker; - No. 7 (bow) - for anchors, mooring ropes, etc. with drainage; - No. 8 (right rear) - the possibility of equipping the containers under the cover of the locker. The containers for accessories under the cover of the locker - 3 Pcs. |
|
 |
| 5 |
LIvewell locker - for living fish: - a water pump, - electrical installation, - automatic timer 40/240 sec, - a water drain. Set installed in locker No. 2. |
|
 |
| |
| INSTALLATION FOR BOW MOTOR - CHOOSE ONE |
| 6 |
Power installation for the electric bow motor 12V:
- The cable CU 16mm2,
- 60A connector for the electric motor cable,
- Battery holder (175x350x240mm) in the locker No. 5,
- Clamps,
- Socket 12V + 2x USB,
- Safe fuse,
- Trim button for outboard engine,
- 2x automatic charger for battery 12V with power cable built into the boat (ip68),
- DVSR. |
|
 |
| 7 |
Power installation for the electric bow motor 24V:
- The cable CU 16mm2,
- 60A connector for the electric motor cable,
- 2x battery holder (175x350x240mm) in the locker No. 5,
- Clamps,
- Socket 12V + 2x USB,
- Safe fuse,
- Trim button for outboard engine,
- automatic charger for 24V battery + automatic charger for battery 12V with power cable built into the boat (ip68) |
|
20 € |
| |
| 8 |
- INOX mooring ears - 3 Pcs, - Rubing strake with INOX ending, - Transom with a set of protectors for outboard engine (column L) - max. EP - 145 HP (max. weight 180 kg) and electric motor or 2nd outboard max. 10HP, - Drains from the engine compartment, - Handrelings 2x 50cm + 2x 80cm, - Rear railings set - 2 Pcs, - INOX 150 cleats - 4 Pcs, - Gravity water outflow from the deck - self-draining deck, - Cup holder, - Measure for fishes. |
|
 |
| 9 |
- Possibility to mount transduser in locker No. 1 (reading through the hull - concerns transducer to max. 200 kHz). - Mounting location (bay) of Garmin SV side sonar transducers, Garmin DV transducers, Lowrance Totalscan or 3D transducers under the hull. |
|
 |
| 10 |
Automatic bilge pump in locker No.1, electrical installation, on-off switch and drainage. Pump connected outside the main switch. |
|
 |
| 11 |
Stationary fuel tank 80L with holder, fuel filler, fuel sensor, vent. |
|
 |
| 12 |
Starter battery switch with wiring + battery clutch. |
|
 |
| 13 |
Holder for Starting Battery (dimensions 175x350x215 with mounting bottom (footer)) in the rear locker No. 1 |
|
 |
| 14 |
- Navigation top LED light, - Navigation bow red+green LED light, - Horn, - 12V socket + 2x USB 5V socket, - Lighting deck LED - 3 PCs., - Set of ON-OFF switches and fuses. |
|
 |
| 15 |
Fire extinguisher 2 kg with handle |
|
 |
| 16 |
Firs Aid Kit |
|
 |
| 17 |
Small paddle |
|
 |
| 18 |
INOX 4 step ladder on transom |
|
 |
| 19 |
Hydraulic transmission kit (instead of transmission kit) |
|
 |
| 20 |
Controle remote ties - 2 Pcs set |
|
 |
| 21 |
Cover for ties and wiring ∅50 |
|
 |
| 22 |
Fuel gauge to pos. 11 |
|
 |
| 23 |
Additional seat mount socket - 1, 2 or 3 Pcs |
|
 |
| 24 |
Passenger seat Premium - removable, swivel - 1, 2 or 3 Pcs to pos. 23 |
|
 |
| 25 |
Pillow for front |
|
 |
| 26 |
Pillows for left and right rear - 2 Pcs set |
|
 |
| 27 |
Mounting bracket for GARMIN or Lowrance transducer under the hull |
|
 |
| 28 |
RAM Mount holder 5,6" for sonar screen. |
|
 |
| 29 |
Transport cover for boat |
|
 |
| 30 |
Motorguide Removable Mounting Plates - aluminum |
|
 |
| 31 |
Motorguide Removable Mounting Plates - nylon |
|
 |
| 32 |
NMEA2000 Starter + interface for displaying engine parameters on the fishfinder screen - HONDA |
|
 |
| 33 |
NMEA2000 Starter + interface for displaying engine parameters on the fishfinder screen - SUZUKI |
|
 |
| 34 |
NMEA2000 Starter + interface for displaying engine parameters on the fishfinder screen - YAMAHA |
|
 |
| 35 |
Pneumatic life jacket AQUARIUS 150N, automatic, ISO12402-3. |
|
 |
| 36 |
Safety vest - size XS - XXL |
|
 |
| 37 |
Life jacket - size XS - XXL |
|
 |
| 38 |
Lifebuoy |
|
 |
| 39 |
Deck cleaning kit with pressure pump, on-off switch, fuse. |
|
 |
| 40 |
Magnetic holder (3 Pcs) for metall equipment - 2 sets. |
|
 |
| 41 |
Holder for 3 rods - 1 or 2 Pcs. |
|
 |
| 42 |
INOX holder for 3 rods - 1 or 2 Pcs. |
|
 |
| 43 |
SCOTTY sockets for fishing rod holders RODMASTER II and other tools SCOTTY - 4 Pcs |
|
 |
| 44 |
SCOTTY RodMaster II trolling holder (to pos. 43) - 1 to 4 Pcs |
|
 |
| 45 |
SCOTTY 281 trolling holder (to pos. 43 - 1 to 4 Pcs |
|
 |
| 46 |
SCOTTY fender rings 2 pack (to pos. 43) - 1 or 2 sets. |
|
 |
| 47 |
Pneumatic fender 12x45 cm (to pos. 46) - 1 to 4 Pcs |
|
 |
| 48 |
SCOTTY removable anchor lock, front |
|
 |
| 49 |
INOX front anchor roller |
|
 |
| 50 |
Anchor - rubber weight 14 kg |
|
 |
| 51 |
Anchor - type Riverfox 11,5 kg |
|
 |
| 52 |
Rope ∅8 mm - to anchor or mooring (1 = 15m; 2 = 30m; 3 = 45m; 4 = 60m) |
|
 |
|
Basis prijs Incl. B.T.W. |
|
19 488 € |