RIVERFOX 500 - AUSSTATTUNG

Basispreis (inkl. MwSt.) -- 19 488 €


Ausstattung FOTO 500
Basispreis
inkl. MwSt.
19 488 
1 - Steering console with removable windshield,
- Steering gear up to 115 PH with engine return blockage with tie,
- Steering wheel - INOX or sporty,
- Holders for cell phone and drink,
- Swivel seat Premium with height adjustment and shock absorber,
- Possibility of build-in sonar screen on steering console.
2 Passenger seat Premium with mount socket - removable, swivel
3 Casting seat on the upper deck, pneumatically adjustable in the 61-76 cm range, removable.
4 Locker:
- No. 1 (rear) - technical locker (battery, pumps, installations);
- No. 2 (left rear) - Livewell locker
- No. 3 (left) - the possibility of equipping the containers under the cover of the locker;
- No. 4 (left) - length 220 cm for fishing rods, the possibility of equipping the containers under the cover of the locker;
- No. 5 (middle) - the possibility of equipping the containers under the cover of the locker;
- No. 6 (front) - the possibility of equipping the containers under the cover of the locker;
- No. 7 (bow) - for anchors, mooring ropes, etc. with drainage;
- No. 8 (right rear) - the possibility of equipping the containers under the cover of the locker.
The containers for accessories under the cover of the locker - 3 Pcs.
5 LIvewell locker - for living fish:
- a water pump,
- electrical installation,
- automatic timer 40/240 sec,
- a water drain.
Set installed in locker No. 2.
 
INSTALLATION FOR BOW MOTOR - CHOOSE ONE
6 Power installation for the electric bow motor 12V:
- The cable CU 16mm2,
- 60A connector for the electric motor cable,
- Battery holder (175x350x240mm) in the locker No. 5,
- Clamps,
- Socket 12V + 2x USB,
- Safe fuse,
- Trim button for outboard engine,
- 2x automatic charger for battery 12V with power cable built into the boat (ip68),
- DVSR.
7 Power installation for the electric bow motor 24V:
- The cable CU 16mm2,
- 60A connector for the electric motor cable,
- 2x battery holder (175x350x240mm) in the locker No. 5,
- Clamps,
- Socket 12V + 2x USB,
- Safe fuse,
- Trim button for outboard engine,
- automatic charger for 24V battery + automatic charger for battery 12V with power cable built into the boat (ip68)
20 
 
8 - INOX mooring ears - 3 Pcs,
- Rubing strake with INOX ending,
- Transom with a set of protectors for outboard engine (column L) - max. EP - 145 HP (max. weight 180 kg) and electric motor or 2nd outboard max. 10HP,
- Drains from the engine compartment,
- Handrelings 2x 50cm + 2x 80cm,
- Rear railings set - 2 Pcs,
- INOX 150 cleats - 4 Pcs,
- Gravity water outflow from the deck - self-draining deck,
- Cup holder,
- Measure for fishes.
9 - Possibility to mount transduser in locker No. 1 (reading through the hull - concerns transducer to max. 200 kHz).
- Mounting location (bay) of Garmin SV side sonar transducers, Garmin DV transducers, Lowrance Totalscan or 3D transducers under the hull.
10 Automatische Bilgepumpe installiert in Stauraum 1, ON/OFF-Schalter und Ablauf   
11 Stationary fuel tank 80L with holder, fuel filler, fuel sensor, vent.
12 Starter battery switch with wiring + battery clutch.   
13 Holder for Starting Battery (dimensions 175x350x215 with mounting bottom (footer)) in the rear locker No. 1
14 - Navigation top LED light,
- Navigation bow red+green LED light,
- Horn,
- 12V socket + 2x USB 5V socket,
- Lighting deck LED - 3 PCs.,
- Set of ON-OFF switches and fuses.
15 Feuerlöscher 2 kg
16 Firs Aid Kit
17 Stechpaddel
18 INOX Badeleiter mit 4 Stufen
19 Hydraulic transmission kit (instead of transmission kit)
20 Controle remote ties - 2 Pcs set
21 Verrohrung für Lenkseile und Verkabelung - Durchmesser 50mm
22 Fuel gauge to pos. 11
23 Zusätzliche Aufnahme für Bootsstühle - 1,2 oder 3 Stk
24 Passenger seat Premium - removable, swivel - 1, 2 or 3 Pcs to pos. 23
25 Polster vorne
26 Polster für hinten links und rechts - Set 2 Stk.
27 Mounting bracket for GARMIN or Lowrance transducer under the hull
28 RAM Mount Halterung 5,6" für Echolotbildschirm.
29 Plane für Transport
30 Motorguide abnehmbare Montageplatten - Aluminum
31 Motorguide abnehmbare Montageplatten - nylon
32 NMEA2000 Starter + interface for displaying engine parameters on the fishfinder screen - HONDA
33 NMEA2000 Starter + interface for displaying engine parameters on the fishfinder screen - SUZUKI
34 NMEA2000 Starter + interface for displaying engine parameters on the fishfinder screen - YAMAHA
35 Pneumatische Rettungsweste AQUARIUS 150N, automatisch, ISO12402-3.
36 Sicherheitsweste - Größen XS - XXL
37 Rettungsweste - Größen XS - XXL
38 Rettungsring
39 Deckreinigungskit inkl. Druckpumpe, ON/OFF-Schalter und Sicherung
40 Magnethalter (3 Stk.) für Gegenstände aus Metall - 2 Sets
41 Rutenhalterung für 3 Ruten - 1 oder 2 Stk.
42 INOX Rutenhalterung für 3 Ruten - 1 oder 2 Stk.
43 SCOTTY Konsolen passend zu SCOTTY Schlepprutenhaltern und anderen SCOTTY Produkten - 4 Stk.
44 SCOTTY Rodmaster II Schlepprutenhalter (kompatibel zu Pos. 43) - 1 bis 4 Stk.
45 SCOTTY 281 Schlepprutenhalter (kompatibel zu Pos. 43) - 1 bis 4 Stk.
46 SCOTTY Fenderringe (2 Stk. Packung) - kompatibel zu Pos. 43
47 Fender luftgefüllt 12x45cm (passend zu Pos. 46) - 1 bis 4 Stk.
48 SCOTTY abnehmbare Ankerseilklemme, vorne
49 INOX Bugankerrolle
50 Anker gummiert - 14 kg
51 Flussanker 11,5 kg
52 Seil ∅ 8 mm - als Anker- oder Mooringleine geeignet (1 = 15m; 2 = 30m; 3 = 45m; 4 = 60m)
Basispreis
inkl. MwSt.
19 488 

DISCLAIMER