RIVERFOX 500 - FEATURES

Basic price (VAT TAX INCLUDED) -- 19 488 €

	Features	FOTO	500
	Basic price VAT TAX INCLUDED		19 488 €
1	Steering console with removable windshield: - Steering gear up to 115 PH with engine return blockage with tie, - Steering wheel - INOX or sporty, - Holders for cell phone and drink, - Swivel seat Premium with height adjustment and shock absorber, - Possibility of build-in sonar screen on steering console.
2	Passenger seat Premium with mount socket - removable, swivel
3	Casting seat on the upper deck, pneumatically adjustable in the 61-76 cm range, removable.
4	Lockers: - No. 1 (rear) - technical locker (battery, pumps, installations); - No. 2 (left rear) - Livewell locker - No. 3 (left) - the possibility of equipping the containers under the cover of the locker; - No. 4 (left) - length 220 cm for fishing rods, the possibility of equipping the containers under the cover of the locker; - No. 5 (middle) - the possibility of equipping the containers under the cover of the locker; - No. 6 (front) - the possibility of equipping the containers under the cover of the locker; - No. 7 (bow) - for anchors, mooring ropes, etc. with drainage; - No. 8 (right rear) - the possibility of equipping the containers under the cover of the locker. The containers for accessories under the cover of the locker - 3 Pcs.
5	LIvewell locker - for living fish: - a water pump, - electrical installation, - automatic timer 40/240 sec, - a water drain. Set installed in locker No. 2.
INSTALLATION FOR BOW MOTOR - CHOOSE ONE
6	Power installation for the electric bow motor 12V: - The cable CU 16mm2, - 60A connector for the electric motor cable, - Battery holder (175x350x240mm) in the locker No. 5, - Clamps, - Socket 12V + 2x USB, - Safe fuse, - Trim button for outboard engine, - automatic ProSport 20 Dual charger for 2x battery 12V with power cable built into the boat (ip68), - DVSR.
7	Power installation for the electric bow motor 24V: - The cable CU 16mm2, - 60A connector for the electric motor cable, - 2x battery holder (175x350x240mm) in the locker No. 5, - Clamps, - Socket 12V + 2x USB, - Safe fuse, - Trim button for outboard engine, - automatic ProSport 20 Triple charger for 3x battery 12V with power cable built into the boat (ip68)		10 €
8	- INOX mooring ears - 3 Pcs, - Rubing strake with INOX ending, - Transom with a set of protectors for outboard engine (column L) - max. EP - 145 HP (max. weight 180 kg) and electric motor or 2nd outboard max. 10HP, - Drains from the engine compartment, - Handrelings 2x 50cm + 2x 80cm, - Rear railings set - 2 Pcs, - INOX 150 cleats - 4 Pcs, - Gravity water outflow from the deck - self-draining deck, - Cup holder, - Measure for fishes.
9	- Possibility to mount transduser in locker No. 1 (reading through the hull - concerns transducer to max. 200 kHz). - Mounting location (bay) of Garmin sonar transducers, Lowrance Totalscan (and newer) or 3D transducers under the hull.
10	Automatic bilge pump in locker No.1: - Electrical installation, - ON - OFF switch and drainage. Pump connected outside the main switch.
11	Stationary fuel tank 80L with holder: - fuel filler, - fuel sensor, - vent.
12	Starter battery switch with wiring + battery clutch.
13	Holder for Starting Battery (dimensions 175x350x215 with mounting bottom (footer)) in the rear locker No. 1
14	Navigation set: - Navigation top LED light, - Navigation bow red+green LED light, - Horn, - 12V socket + 2x USB 5V socket, - Lighting deck LED - 3 PCs., - Set of ON-OFF switches and fuses.
15	Fire extinguisher 2 kg with handle
16	Firs Aid Kit
17	Small paddle
18	INOX 4 step ladder on transom
19	Hydraulic transmission kit (instead of transmission kit)
20	Controle remote ties - 2 Pcs set
21	Cover for ties and wiring ∅50
22	Fuel gauge to pos. 11
23	Additional seat mount socket - 1, 2 or 3 Pcs
24	Passenger seat Premium - removable, swivel - 1, 2 or 3 Pcs to pos. 23
25	Pillow for front
26	Pillows for left and right rear - 2 Pcs set
27	Mounting bracket for GARMIN or Lowrance transducer under the hull
28	RAM Mount holder 5,6" for sonar screen.
29	Transport cover for boat
30	Motorguide Removable Mounting Plates - aluminum
31	Motorguide Removable Mounting Plates - nylon
32	NMEA2000 Starter + interface for displaying engine parameters on the fishfinder screen - HONDA
33	NMEA2000 Starter + interface for displaying engine parameters on the fishfinder screen - SUZUKI
34	NMEA2000 Starter + interface for displaying engine parameters on the fishfinder screen - YAMAHA
35	Pneumatic life jacket AQUARIUS 150N, automatic, ISO12402-3.
36	Safety vest - size XS - XXL
37	Life jacket - size XS - XXL
38	Lifebuoy
39	Deck cleaning kit with pressure pump, on-off switch, fuse.
40	Magnetic holder (3 Pcs) for metall equipment - 2 sets.
41	Holder for 3 rods - 1 or 2 Pcs.
42	INOX holder for 3 rods - 1 or 2 Pcs.
43	SCOTTY sockets for fishing rod holders RODMASTER II and other tools SCOTTY - 4 Pcs
44	SCOTTY RodMaster II trolling holder (to pos. 43) - 1 to 4 Pcs
45	SCOTTY 281 trolling holder (to pos. 43) - 1 to 4 Pcs
46	SCOTTY fender rings 2 pack (to pos. 43) - 1 or 2 sets.
47	Pneumatic fender 12x45 cm (to pos. 46) - 1 to 4 Pcs
48	SCOTTY removable anchor lock, front
49	INOX front anchor roller
50	Anchor - rubber weight 14 kg
51	Anchor - type Riverfox 11,5 kg
52	Rope ∅8 mm - to anchor or mooring (1 = 15m; 2 = 30m; 3 = 45m; 4 = 60m)
	Basic price VAT TAX INCLUDED		19 488 €

DOWNLOAD OFFER AS PDF FILE

RECOMENDED OUTBOARDS

PLOTTERS & FISHFINDERS

DOWNLOAD RCD EXAM REPORT

We also offer a large selection:
- fishfinders and chartplotters,
- outboard engines,
- trolling engines,
and others.
If you are interested in equipping the boat with this or other equipment, write us an e-mail about it.